Horizontal Steam Sterilizer Autoclave for Large Loads

What is a horizontal autoclave used for?

A horizontal steam sterilizer autoclave is usually selected for larger or heavier loads that are easier to place through a front-opening chamber. Compared with tabletop or vertical units, the horizontal layout can make loading, unloading and routine workflow easier when baskets, packs, dressings, containers or instruments are processed frequently.

Before choosing a horizontal model, buyers should confirm usable chamber size, load dimensions, drying needs, cycle frequency, drainage, steam/water conditions and installation space. For medical dressing, labware or production materials, the practical loading method is often as important as the nominal chamber volume.

Best fit: hospitals, laboratories and production rooms with frequent or bulky sterilization loads.
Key check: compare the chamber opening, basket/cart arrangement and drying requirement before asking for price.
When to consider vertical: mixed lab loads where floor space is limited and top loading is acceptable.

200L Horizontal Steam Sterilizer Autoclave

Automatically controlled the sterilizing process, easy to operate.

With drying function, suitable for the medical dressing drying.

With over-temperature, over-pressure auto-protect.

The door can not be open until the pressure in the chamber is reduced to0.027MPa. And the unit can’t be started on if the door doesn’t close well.

The safety value will be open automatically when the inner pressure over0.24MPa, and the steam would be exhausted the water tank.

Automatically cut off the power if the water-lack happened, and alarm atthe meanwhile.

The chamber of the sterilizer is made of stainless steel.

With printer.

200L Horizontal Vacuum Steam Sterilizer Autoclave

　　With over-temperature, over-pressure auto-protect device.
　　Sterilizing course automatic sterilization controlled by computer, easy to operate.
　　Automatically cut off the power if the water-lack happened, and alarm atthe meanwhile.
　　The chamber of the sterilizer is made of stainless steel.
　　Touch screen colour display and with printer.With drying function.

500L Horizontal Steam Sterilizer Autoclave

Automatically controlled the sterilizing process,easy to operate.
With drying function, suitable for the medical dressing drying.
With over-temperature, over-pressure auto-protect.
The door can not be open until the pressure in the chamber is reduced to0.027MPa.And the unit can’t be started on if the door doesn’t close well.
Automatically cut off the power if the water-lack happenedand alarm at the meanwhile.
The chamber of the sterilizer is made of stainless steel.

Current Buyer Selection

Compare Current Autoclave Directions

For the current buyer-focused comparison of load type, chamber format, space and daily workflow, use the autoclave selection guide.