How to Overcome Rotary Vane Vacuum Pump Noise?

2018-05-29 14:51:00
Nina
Original
552
Summary : During the operation process of a rotary vane vacuum pump, there are scrannel noises sometimes. What causes the vacuum pump noise? And how to overcome rotary vane vacuum pump noise?

During the operation process of a rotary vane vacuum pump, there are scrannel noises sometimes. What causes the vacuum pump noise? And how to overcome rotary vane vacuum pump noise?

vacuum pump noise

rotary vane vacuum pump noise

Several reasons that why rotary vane vacuum pump has noises during operation:

1.Rotary vane crash caused by spring breakage;

2.Rotor operating grating caused by incorrect installation;

3.Accessories has burr. Pump chamber deformation cause operation noise;

4.Poor lubrication cause abnormal noise;

5.Inner bearing is lack of oil.


All of those would cause rotary vane vacuum pump noise. Do you know how to solve it? For example: incorrect installation cause end cover plate are not vertical with axial chamber, when open the end cover, you can see end cover plate has half of arc, it means the rotary vane has been pushed hardly through this part and could not contact with vacuum pump chamber. For this cases, you can fix the chamber end face to make it vertical with axial chamber, and grind off the scratch then adjust the gaps between rotor, rotary bane, and adjust the flexibility of rotary spring.

Anyway, users should not ignore the vacuum pump noise, cause small noise may cause serious malfunctions. The rotary vane vacuum pump is a featured product of our company, inquiry to [email protected]

    Article Category
    Contact Us
    Contacts : Lanphan
    Phone : +86-371-67447999
    Fax : +86-371-67447888
    Email : [email protected]
    Skype : [email protected]
    Address : Room801, Building B, CC Mall, Jianshe Road, Zhongyuan District, Zhengzhou, Henan, China
    SNS :
    Hot Article
    Dec 5  A water bath is a laboratory equipment used to keep water at a constant temperature for incubating samples in a laboratory.
    May 15  A circulating water bath is a lab constant temperature equipment, providing heat source for varieties of devices that need heating. The circulating water bath is used to keep water at a constant temperature for incubating samples in a laboratory.
    Jul 19  July 7th, 2017, Henan Lanphan Trade Co., Ltd. has the mid-year summing-up meeting. The meeting has summed up first half year’s work, analyzed the situation and challenge we face, deploy working plan for the next half year, mobilize all staffs to work hard to accomplish company annual tasks.