How to Maintain Oil Free Diaphragm Vacuum Pump?

2018-04-24 14:30:00
Nina
Original
868
Summary : The oil free diaphragm vacuum pump or oilless vacuum pump is a transfiguration type vacuum pump, it has been widely used for vacuum filtration, rotary evaporation, freezing, drying, vacuum concentration and molecular distillation. How to maintain oilless vacuum pump?

The oil free diaphragm vacuum pump or oilless vacuum pump is a transfiguration type vacuum pump, it has been widely used for vacuum filtration, rotary evaporation, freezing, drying, vacuum concentration and molecular distillation.

oilless vacuum pump

oil free diaphragm vacuum pump

Each set of the oilless vacuum pump is equipped with following components: a vacuum manometer (-0.1MPa), a connecting rubber tube, a silencer and an instruction book. If your oilless vacuum pump is broken, you can return it to our factory for maintenance or follow by below steps to maintain by yourself.


1.Disconnect the power of oil free diaphragm vacuum pump, remember to power off before maintenance to ensure safety.

2.Loosen the pressure valve and let out the gas inside the oil free diaphragm vacuum pump.

3.Pull up the rubber tube.

4.Dismount the pressure valve and remember its installation position, dismount four-way valve.

5.Screw out the screws which at the head of oilless vacuum pump, open air chamber.

6.The sealing ring is in the groove of the opposite of air chamber, change or wrap it clean if sealing ring is damaged or dirty.

7.Inspect valve block (black rubber and stainless steel), change a new one if damaged.

8.Fix the black diaphragm by gland, check whether the diaphragm is broken, please change it if damaged.

9.If require, please use water solvent to clean the head of oilless vacuum pump or use high pressure gas to blow away.


In addition, please avoid using organic compounds, acids and corrosive solvents to clean the oilless vacuum pump. Should you have any other questions or inquiry, please send it to [email protected]

    Article Category
    Contact Us
    Contacts : Lanphan
    Phone : +86-371-67447999
    Fax : +86-371-67447888
    Email : [email protected]
    Skype : [email protected]
    Address : Room801, Building B, CC Mall, Jianshe Road, Zhongyuan District, Zhengzhou, Henan, China
    SNS :
    Hot Article
    May 15  A circulating water bath is a lab constant temperature equipment, providing heat source for varieties of devices that need heating. The circulating water bath is used to keep water at a constant temperature for incubating samples in a laboratory.
    Dec 5  A water bath is a laboratory equipment used to keep water at a constant temperature for incubating samples in a laboratory.
    Apr 9  Chemical laboratory instruments is an important chemical experimental tool, only have a completely understanding of equipments used in chemistry laboratory, we can use it in a right way.