Slip Type Expansion Joint
Slip type expansion joint also called as tubular expansion joints , pipe expansion connector, it’s a compensation device for thermal fluid pipeline. It is mainly used for straight pipe linings, and suitable for hot water, steam, oil medium, through the sliding movement of the sliding sleeve external sleeve, achieve compensation of thermal expansion. Slip type expansion joint is suitable for the medium pressure 2.5 MPa or less, medium temperature within 40 ℃ ~ 600 ℃.
Product features of slip type expansion joints:
- Slip type expansion joint uses new seal material flexible graphite ring, with strong strength, low friction coefficient (0.04 ~ 0.10), not aging, effect is good, convenient maintenance, etc.
- The service life of the slip type expansion joint is long; fatigue life is the same with pipeline. Sliding surface through special processing, in salt water and salt solution environment, corrosion resistant performance is good, more than 50 times higher than austenitic stainless steel.At the same time, the sealing effect caused by abrasion wears off after so many years, but again the fastening flange, strengthens the sealing performance, can also will loosen bolts in press circles, then into a layer or two layers of sealing ring, clamping pressure circle, continue to use.
- Slip type expansion joint is suitable for chloride ion content requirements, especially suitable for medium or environment excess chlorine ion system.
- Slip type expansion joints have single direction and bi-directional compensation structure, bi-directional type’s feature is that the expansion joint can achieve two-way compensation function, no matter the medium enter any end and increase the amount of compensation.
- Buried slip type expansion joint can be directly buried underground, maintenance well is not necessary, low engineering cost.
Welding slip type Expansion Joint datasheet
|Compensation(Mm)||Min Length (Mm)||Max Length(Mm)||Installation
Flange Connection single slip type Expansion Joint
Bi-direction slip type Expansion Joint
- According to product’s using condition, technicians will offer rationalization;
- Provide detailed product performance specification;
- Provide professional quoted price;
- Provide 24-hour technical consulting reply.
- Begin to supervise from raw material, its qualified rate can reach to 100%;
- Whole manufacturing process are in strict accordance with promised procedure requirements, product qualified rate can reach to 100%;
- Provide product’s inspection record of key junctures to customers;
- Provide production schedule photos to customers at regular intervals;
- Package and transport products strictly accordance with export standard.
- Under the premise of correct installation, normal maintenance and using, we guarantee one-year warranty period;
- When warranty period has expired, our sold products enjoys lifetime guarantee repair, we only charge cost price for changing product’s standard component and sealing component;
- During installation and adjustment period, our after-sale service staff will communicate with customers frequently to know product’s running state in time. Assist customers to install and adjust products until customers are satisfied;
- If product has malfunction during operation period, we’ll offer you satisfied answer in time. We’ll reply you within 1 hour and provide solution or send staff to spot within 24 hours after receiving maintenance notification.
- Lifelong free technical support. Conduct satisfaction survey and inquiry equipment running condition to clients by telephone or e-mail semiannually from the first day of equipment running, put on records of acquired information.
- Can the slip type expansion joints length adjustable?
Yes, we can adjust the length according to the actual movement requirements.
- What's the painting of your carbon steel expansion joints?
Usually, the inside and outside painting or coating is epoxy painting.
- What's the thickness of the painting?
The painting thickness is ≥200 micron.
- Will you offer installation manual?
Yes, we will offer professional installation manual.
- What's the MOQ of this Expansion Joint?
Usually, the exporting package of slip type expansion joint is nonfumagation wooden case, sometimes, steel frame fix is necessary.
1.Slip type expansion joint has large compensation amount. It won’t generate blind flange thrust or internal pressure thrust, no instability and water hammer. In appearance design, the thrust can be ignored, since it has little effect on the fixed support, thus, fixed support and concrete foundation can be smaller to reduce engineering cost.
2.Slip type expansion joint employs unique sealing technology and most advanced sealing material, unique operation mode enables very slight abrasion, no leakage, no need to change sealing material in 15 years.
3.Other compensator has disadvantages of small compensation amount, low safety performance, inconvenient to maintain, especially used in city underground pipe network. Choosing Lanphan slip type expansion joint, you can lay a long distance pipeline(no need to install expansion joints within 1000m), our products can reduce hydraulic resistance, reduce loss of pressure, reduce cost reduction, also save project cost for 20% to 30%.
4.Safe operation in condition of high temperature and high pressure.
5.Easy to maintain: available for maintenance with temperature and pressure.
6.Convenient to design: in condition of large axial displacement or axial thrust, and pipe network structure needs to be adjusted, applying vertical pipeline structure can obtain larger compensation amount and balanced capacity, also able to change pipeline direction according to pipeline network structure, only need to calculate its force of friction.
|Email :||[email protected]|
|Address :||Room801, Building B, CC Mall, Jianshe Road, Zhongyuan District, Zhengzhou, Henan, China|